RD TECH Services and Tuning





	Services Available Road (Street) Tuning Services for WRX/STi Please click Here. Street Tuning Services for Honda/Acura We specialize in street tuning Honda cars. If you have an obd1 ecu, most likey we can tune your car. Please verify that you are running one of these ecu. These are the ecus that we support.They should be of OBD1 family and be USDM or JDM. P28 P72 P30 P06 P05 P61 PR4 If you dont have one of these electronic control unit, but are planning to run one, then your vehicle can be tuned. OBD2a, OBD2b, and OBD0 cars can be tuned if you are running one of these ecus. If you need one, look under PRODUCT/ECU in the main menu and select the one that best suite your need (a P28 can be used with most or if not all application). Understand that a conversion harness is also needed for the ECU to plug into your non-OBD1 vehicle. Service Fee We charge per car, not per hour. Your vehicle should be running and ready for street tuning. All wirings should be correct and there should be no check engine light. We do help eliminate check engine lights when possible. Additiona fees apply. Street Tuning Fees are as follow: All Motor *$100.00USD* Turbo Setups *$150.00USD* All street tuning comes with a custom chip. Tuning Time The average time it takes to tune a car are listed as follows: All motor--1hr to 2 hr. Turbo Setup-- 2hr to 4 hr. *Please email or call for an appointment after payment.* ECU Chipping Service Honda We provide ecu chipping services. Please make sure that your ecu is working before shipping it out to us. We will try our best to ensure of its proper working condition. We will chip your ecu to your specs. ECU Chipping Service fee includes return shipping and all necessary parts to perform the job including the chip. We chip OBD1 and OBD0 ECUs. Here are some of the ECUs we can chip: P28, P05, P06, P61, P72, PM6, PR4, PR3, PW0, P08, and more. Please email us if your not sure. $65.00USD ECU Socketing Service This service is for Nissan, Mitsubishi, Honda, Acura and others. If you have a chip kit for your car and you need help soldering or desoldering, we can help. Most of the time desoldering is needed. We use high quality soldering and desoldering stations to perform our jobs so you can be confident that when its all done, the work performed is excellent. Please email us if you have any questions. $40.00USD

Why Street Tuning?

Well, we provide street tuning for four reasons. The First reason is because its the safest way to run performance parts without blowing up provided everything is within specifications. The second reason is because it's by far more afforable than Dyno tuning. The third reason is the fact that all dyno uses or relies on a wideband reading for safe air fuel ratios. We currently utilize that same technology for street tuning. The forth reason is because street tuning is done on real driving condition, the end result is better driveability and good gas milage.

Why Tune Your Car?

Without the proper tuning, your vehicle may consume an excess amount of fuel, in result, leaving you with bad gas mileage along with engine choking and bad idle or your vehicle may be starved of fuel which will make the it run weak and studder. Tuning your vehicle to acheive a certain lamda will maximize your power gain while staying at a safe air fuel ratio level. Although running leaner will increase horsepower, you'll risk detonating your engine. Its best to keep all motor application at about 13.2:1 and turbo apllication at about 12.0:1 when running on gasoline (perferably 91+ octane to reduce or eliminate knocking).

We only use high quality industry stan soldering/ desoldering stations.